1.size: screw: M4-M30
Nut: M4-M24
Washer: M4-M24
OR as required
2.standard: DIN912,DIN931,DIN933,DIN985,DIN7991,DIN6923,DIN6921,DIN125A,ETC..
3.technique:CNC processing,mechanically polished,milling,thread rolling,forged,etc...
4.color: green,bule,black,red,gold or as your required.
Gr5 ( Ti-6Al-4V)
This alpha-beta alloy is the workhorse alloy of the titanium industry. The alloy is fully heat treatable in section sizes up to 15mm and is used up to approximately 400°C (750°F). Since it is the most commonly used alloy – over 70% of all alloy grades melted are a sub-grade of Ti6Al4V, its uses span many aerospace airframe and engine component uses and also major non-aerospace applications in the marine, offshore and power generation industries in particular.
The composition of Ti6Al4V.
Grade | Chemical Composition (%) | ||||||||||||||||||
Main Content | Others( ≤ ) | ||||||||||||||||||
Ti | Al | Sn | Mo | V | Cr | Mn | Zr | Pd | Ni | Cu | Nb | Si | B | Fe | C | N | H | O | |
Gr5 | Balance | 5.5~ 6.8 | - | - | 3.5~ 4.5 | - | - | - | - | - | - | - | - | - | 0.30 | 0.10 | 0.05 | 0.015 |
0.20 |
产品展示 Show
在线客服 | ||||||
| ||||||
在线客服 |