99.95% pure moly Mo sputtering target
moly sputtering target
1. Purity :> =99.95% molybdenum
Other elements :< =0.05%
Each element :< =0.01%
2. Density : 10.2g/cm3
3. Certification : ISO9001:2008,
4.Molybdenum material from .090 inches to 3 inches in thickness is classified as molybdenum plate.
5.Standard availability is described below. Other sizes and tolerances are available.
|
Thickness |
Max. Width |
Max. Length |
|
.090" |
24" |
110" |
|
.125" |
24" |
80" |
|
.250" |
24" |
40" |
|
.500" |
24" |
24" |
|
>.500" |
24" |
|
For greater thickness, plate 产品展示 are normally limited to 40 kilograms maximum weight per piece.Molybdenum Plate Standard Thickness Tolerance
|
Thickness |
.25" to 6" |
6" to 12" |
12" to 24" |
|
.090" |
± .005" |
± .005" |
± .005" |
|
> .125 |
± 4% |
± 4% |
± 4% |
Molybdenum Plate Standard Width Tolerance
|
Thickness |
.25" to 6" |
6" to 12" |
12" to 24" |
|
.090" |
± .031" |
± .031" |
± .031" |
|
> .125 |
± .062" |
± 062" |
± 062" |
6. Surface Condition
Surface can be supplied in a shiny, matte, or as-rolled condition; dependent upon thickness and width parameters.
7. Heat Treatment
Molybdenum flat 产品展示 are rolled and annealed to provide the optimum condition for the desired end use.
8. Uses
Molybdenum plate are widely used in the construction of furnace tooling and parts and as a feed stock for the fabrication of parts for the electronics and semiconductor industries
